TELDREAM Company is a manufacturer of a complete set designed for automatic control of humidity, temperature and air circulation for drying of various types, such as drying of pasta, fruit, mushrooms, etc.
Set complements the existing market offer complete drying kiln and can solve their own or adapt for this purpose room.

Includes:

• Control box with complete electrical equipment (safety of electrical circuits, motors, etc.)
• Microprocessor controller allows the implementation of the set CTW13 humidity and temperature characteristics (details in the description of the driver CTW13)
• A set of control modules or semiconductor contactors
• UPW moisture measuring system
• Temperature sensor PT 100

Thanks to modern electronic control, and semiconductor produced a set of control modules have many advantages, which put him on par with the most solutions used in the world in this field.

The main advantages of the set:

• Full automation of the process (automatic maintenance of preset parameters, the feasibility of preset characteristics of humidity and temperature, automatic switch-off after a set time, etc.), the details in the description of the driver CTW13
• Energy savings up to 30% compared to traditional solutions
• Increasing the viability of the dryer heating elements and motors due to the use of integrating systems in zero load voltage
• High accuracy of measured values
• Clarity of presentation of the measured size and ease of use
• Capacity to carry out the dryer or use a set to control the drying process in a room designed for drying
• Flexibility to fit a set of different volumes of the dryer
• Low cost relative to the opportunities offered

inputs	resistance thermometer humidity sensor	Pt100 Voltage of the measuring system UPW's TELDREAM humidity, others on request
controlled outputs	Relay voltage	Heater: Heater typically 3: 2 kW (3 phase), (merged into a star) Main Engines: 3 engines typically 0.5kW (3 phase), (merged into a star) The exhaust fan: 1 (1-phase)
programming	The programming	On the driver - from the keyboard (driver opportunities CTW13)
Power Supply	voltage	380VAC
alarms	Exceeding the scope of	The signal light and sound - pulsing
	sensor failure	The signal light and sound - pulsing
	Damage to the power circuit	Light and sound signal - a continuous
Set temperature	Range of temperature setting	1 ° C - ° 90 C, other on request
Set humidity	Adjustable humidity range	1% - 99%
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	All parameters shown on display during operation
	degree of protection	total IP20
	operating temperature	0 - 50 ° C
	humidity	80% without condensation
	weight	approximately 10kg
	Sizes	To be agreed. typically: WxSxG (600x400x200mm)

When ordering, please specify:
heater Capacity
Engine parameters (power, current, cos fi)