Indicator is designed to measure the difference in the motor current according to load.
The system consists of two parts: a transmitter module and measurement module. Measuring module transmit measured signal to the transducer, which converts it into a signal 0 - 1V or 0 - 20mA, with 0 corresponding to the bottom, measuring threshold, and 1 (20) maximum threshold of measurement.

With the increasing density of dough measured signal will change its value from 0 to 1 (0 - 20). Based on measurements obtained information about a density of dough.
Using our device will achieve repeatability in the production of dough.

Transmitter module can, in particular, work with one of our regulators. In this way the mixer can be controlled based on the density of the dough, instead of mixing time. This gives a much greater repeatability in the production of dough.

programming	The programming	With two keyboard keys, two modes of operation: programming, normal operation
	The security parameters	Automatic locking when working
Power Supply	voltage	170-250V AC
	power consumption	1,5VA
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	4 digits (red - 14mm)
	degree of protection	From the front IP54, IP20 total
	operating temperature	0 - 60 °C
	humidity	80% without condensation
	weight	150g
	Sizes	WxSxG (36x72x75mm)
	Mounting Hole Dimension	WxS (33x69mm)
	Mounting plate thickness	to 8mm
	Faceplate Color	gray, the other to agree on