Driver electric furnace USPE

 

The controller is a universal driver USPE baking furnace. It allows you to control both the electric furnace as well as furnace oil or gas. It allows you to adjust the temperature of both hysteresis and a simplified algorithm using PID. Extensive measuring inputs allow you to work with a wide range of sensors such as sensors, resistive (eg Pt100), thermocouple, sensors with current output 0-20mA or 4-20mA, or a voltage output 0-1V.

Versatility solution, and a wide range of attachable sensors allows the use of advanced process equipment for baking.

The driver provides comprehensive control of the bakery ovens (or other) and the various chambers in the modular furnaces. Three independent control circuits to control the deck top, bottom and steam chamber. The controller is equipped with real time clock, which enables switching on the furnace at any time to his warm-up without the presence of staff. In addition, the controller is equipped with a memory 20 programs baking. Baking parameters are programmed by the user so they can be changed at any time. Programmed temperature of the upper deck, lower deck temperature and baking time. All configuration functions are available to the user in the programming phase. You can set alarms, setting ranges of input parameters of hysteresis or PID control, the type of sensors, the temperature in the steam chamber and the type of control. All measured values ​​are displayed continuously on display.

• Implemented functions:
  • maintain the set temperature value of three independent processes
  • process Control
  • condensation process control rooms in the furnace of security functions from flooding the furnace with water
  • measuring the duration of the baking of signaling the end of time
  • actuators controlling the furnace (furnace lighting, ventilation, switching on the furnace at a specified time)
• Number of measuring inputs: 3
• wide range of sensors connectable
• Control Option: contactors, triacs, thyristors
• type of control: PID or hysteresis
• PID parameters can be programmed as a user and hysteresis
• Sound and light alarm signals:
  • exceeding the limit value (eg temperature)
  • sensor failure
• non-volatile memory to memorize the set of parameters
• continuation of the process after a power interruption.

inputs	resistance thermometer	Pt100, PT500, PT1000
	Thermocouples	J, K, N, S, R, B
	linear sensors	0-1V, 0-10V, 0-20mA, 4-20mA
	range	Dependent on input type to 999 ° C
output	Relay	6 outputs: 5A/250VAC, resistive load
	voltage	On request: 5VDC, 8VDC, 15VDC
programming	The programming	The keyboard 2 modes of operation: programming, normal operation
	The amount of cooking programs	20
	Real time clock	yes
	The security parameters of the programming	Automatic locking when working
control	Pulse Range PID	Programmable, 1 - 500 ° C
	PID cycle time	Programmable, 1-30 sec
	ON - OFF	You can work on / off (selectable programmable) with adjustable hysteresis (0 - 500°C)
	regulatory action	You can work for heating / cooling
Power Supply	voltage	170-250VAC On request: 24VAC or DC, 12VAC or DC
	power consumption	3VA
alarms	Exceeding the scope of	The signal light and sound - pulsing
	sensor failure	The signal light and sound - pulsing
	Damage to the power circuit	Light and sound signal - a continuous
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	3 + 3 + 4 + 2 digits (green - 14mm)
	display range	999 - temperature; 99:99 - Time: 99 - Programme
	degree of protection	From the front IP54 (IP65 with gasket), total IP20
	operating temperature	0 - 60 ° C
	humidity	80% without condensation
	weight	300g
	Sizes	WxSxG (96x96x90mm)
	Mounting Hole Dimension	WxS (90x90mm)
	Mounting plate thickness	do 6mm
	Faceplate Color	Yellow different negotiated