BIO1 driver is one of two specialized microprocessor controllers control the operation of a producer of yeast. The second driver is BIO2. The driver controls the process of measuring the BIO1 time phases, measure the temperature and on this basis, maintains the desired temperature by heater control rooms and cooling unit. In addition, the controller transmits the current state of the process to the controller BIO2.

Depending on the demand controllers can directly control contactors, or solid state power systems (triacs, thyristors). Cooperate with PT100 sensors.

BIO2 driver is the second of specialized microprocessor controllers control the operation of a producer of yeast. BIO2 controller controlling the pump and agitator, measuring time the pump, operating time and pause agitator. In addition, the controller receives information about the current state of the process from the driver BIO1.

Depending on demand the controller can directly control contactors. semiconductor circuits or power (triacs, thyristors).

The use of drivers BIO1 and BIO2 device ensures reproducibility of the technological process.

inputs	resistance thermometer	Pt100
	range	99°C
output	Relay	5A/250VAC, resistive load
	voltage	On request: 5VDC, 9VDC
programming	The programming	The keyboard 2 modes of operation: programming, normal operation
	The security parameters of the programming	Automatic locking when working
control	ON - OFF or PID	Work on / off or PID
Power Supply	voltage	190-250VAC On request: 24VAC or DC, 12VAC or DC
	power consumption	4VA
alarms	Exceeding the scope of	The signal light and sound - pulsing
	sensor failure	The signal light and sound - pulsing
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	3 + 2 digits (red - 14mm)
	display range	BIO1: 99 - temperature, 24h or 72h - time process BIO2: the time of the pump and the mixer
	degree of protection	From the front IP54, IP20 total
	operating temperature	0 - 45 ° C
	humidity	80% without condensation
	weight	950g
	Sizes	WxSxG (96x96x125mm)
	Mounting Hole Dimension	WxS (91x91mm)
	Mounting plate thickness	to 8mm
	Faceplate Color	gray, the other to agree on

Description of terminals




Types of measuring inputs

code	sensor	range
1	Thermocouple J	0 - 800°C
2	Thermocouple K	0 - 999°C
3	Thermocouple N	0 - 999°C
4	Pt100	0 - 750°C
5	0 - 1 V	-------
6	0 - 20 mA	-------
7	4 - 20 mA	-------