Regulator URM72 - TP is a specialized controller for controlling the heat press. Enables precise temperature control using Seal of advanced PID auto tuning function. Extensive measurement input enables you to collaborate with a wide range of sensors such as sensors, resistive (eg Pt100), thermocouple, sensors with current output 0-20mA or 4-20mA, or a voltage output 0-1V.

Two, large, four - tail displays (red, blue, or green) represent the current measured value, and setting which makes handling very easy and much easier to work.

The controller is equipped with a stopwatch elapsed time heat presses the closure which allows for easy repeatability of the process of obtaining Seal. Regulators have a number of usage counter.

Inputs	Measuring input for Pt100
	Contact input for limit switches
Measuring resolution	0.1% range - 10-bit
Outputs	Voltage output for SSR control optional relay output
	Voltage output to buzzer
User Interface	3 keys
	LED Display 4 +4 digits (red - 14mm)
Power Supply	Voltage	230 VAC
	Power consumption	1,5VA
Alarms	Exceeding the range	The signal light and sound - pulsing
	Sensor failure	Light and sound signal - a continuous
Other	Memory	Protection against power outages, Enduring memory parameter setting value
	Digital display	4 + 4 digits (red, green, or blue - 14mm)
	Degree of protection	From the front IP65 (with seal), total IP20
	Operating temperature	0 - 60 °C
	Humidity	80% without condensation
	Weight	300g
	Size	WxSxG (72x72x80mm)
	Mounting hole dimension	WxS (69x69mm)
	Mounting plate thickness	do 6mm
	Faceplate Color	gray (other by arrangement)

Description of terminals