Based on our water metering devices we are able to do any watering system controlled electronically.

We are able to control a certain amount of points the flow of water both in terms of time, releasing water as well as its temperature.

A description of an exemplary implementation of an automatic watering system with adjustable water temperature.

The system is designed to control the watering from 1 to 17 objects. Watering can be cyclic with a set period. Can also be sprinkled individually once one of the objects.
Each cycle which starts watering is always accompanied by the exit number 18 as the discharge of treated water. The aim is to stabilize the water temperature before the start of proper irrigation facilities. It is recommended to set the water temperature in the discharge was the same as the water temperature for the object from which the watering cycle begins.
For objects that do not have to be watered amount of water in the programs must be set to 0.0. The program number in the dispenser-mixer driver USP output corresponds to the number on the control strip that is
Program No. 1 controls output No. 1 (object number 1), nr2 program exit No. 2, etc.
For each object you program the amount of water and its temperature. The system is protected against the release of too hot water. Exceeding the critical temperature of warm water cuts.

The irrigation system consists of the following devices:

• USP water dispenser mixer with programs
• solenoid valves on the control bar objects from 1 to 17
• elevated to the status indicator showing the driver in a dispenser - water mixer (optional)
• power supply 24VAC

Watering system is applied in gardening to cyclic irrigation or irrigation facilities such as greenhouses.
Description of the used dispenser - mixer:

USP-mixer dispenser is a device equipped with a microprocessor controller, designed for measuring the flow of the water required at a specific temperature. Especially useful for metering of water is needed in various technological processes carried out in cycles, where the temperature plays an important role in such processes in the food industry (bakery, confectionery, pasta production, etc.)
USP-mixer dispenser is adapted to receive hot and cold water directly from water mains. It has a built-in mixer that allows for fast water outflow at the desired temperature.
It is produced in the automatic version, in which the system installed in the device automatically sets the desired temperature of water outflows. In version PROG water dispenser-Mixer you can program the water metering programs. The program is stored quantity and temperature of water outflows. Version A is dosed cyclically adjusted programs.
The device is continuously measured in both the amount of discharged water and its temperature and presents the information on the displays.
After the desired amount of water measured, the device automatically closes its flow. Controlling the device is very convenient and is done using the keys on the front panel controller.
USP-mixer dispenser can be mounted on a wall or stand. It has three common hydraulic connections or hoses (two for water inlet and a water outflow).

To order please call or email to arrange irrigation system design.