Power regulators
The company TELDREAM manufactures power controllers ARM, CRM.
The regulators set the percentage by which the power to be supplied to the actuator. Adjustment is done on a time. Depending on the percentage set by the fill factor is chosen time interval. The interval is programmable.
Power controllers have two outputs. The relay output is used to control contactors, solid state controls the voltage output by actuators.
The company offers:
- ARM - analog power regulator
The controller is the percentage of power supplied to set the potentiometer.
- CRM - digital power controller
The controller is the percentage of power supplied is displayed on the display and set the keys on the front panel.
The controller is programmable. You can set the time interval in the control range of 1 to 99 seconds. and select the output that will control the elements (voltage or relay).
Basic parameters of the power regulators is:
The regulators set the percentage by which the power to be supplied to the actuator. Adjustment is done on a time. Depending on the percentage set by the fill factor is chosen time interval. The interval is programmable.
Power controllers have two outputs. The relay output is used to control contactors, solid state controls the voltage output by actuators.
The company offers:
- ARM - analog power regulator
The controller is the percentage of power supplied to set the potentiometer.
- CRM - digital power controller
The controller is the percentage of power supplied is displayed on the display and set the keys on the front panel.
The controller is programmable. You can set the time interval in the control range of 1 to 99 seconds. and select the output that will control the elements (voltage or relay).
Basic parameters of the power regulators is:
- implemented functions: maintaining the temperature, control supplied power
- control: contactors, triacs, thyristors
- type of control: proportional time
- output type: relay and voltage
- sound and light alarm signals
- non-volatile memory to memorize the set of parameters
- continuation of the process after power failure
- typical applications: welding, maintain the temperature without measurement, regulation of power supplied, baking ovens and other
- controllers are produced in a typical housing 96x48 and 96x96mm.
| Inputs | Alarm input (CRM) | |
| Outputs | One contact output (optional input) | 5A/250VAC, resistive load (5VDC, 9VDC optional) |
| One voltage output | Typical 10 VDC | |
| Programming | Programming method | 3 keys (CRM) Potentiometer (ARM) |
| The security parameters of programming | Automatic locking when working | |
| Control | Method of power control | Turn on / off (PWM) with programmable period of 1-99 s (CRM) |
| Power supply | Voltage | 230VAC, 24VAC, 12VAC, 24VDC, 12VDC |
| Power consumption | 3VA | |
| Alarms | Damage to the power circuit (CRM) | The signal light and sound |
| Other | Memory | Protection against power outages, Enduring memory setting parameters and values |
| Digital display | 3 digit (red 14mm) (CRM) | |
| Degree of protection | From the front IP54, IP20 total | |
| Operating temperature | 0 - 60 ° C | |
| Humidity | 80% without condensation | |
| Weight | 360g | |
| Sizes | WxSxG (48x96x90) or else to agree | |
| Mounting hole dimension | WxS (43x91mm) | |
| Mounting plate thickness | to 8mm | |
| Faceplate color | gray, the other to agree on |
ARM controller clamps
CRM controller clamps
