Indicator is designed to measure the difference in the motor current according to load.

The system consists of two parts: a transmitter module and measurement module. Measuring module transmit measured signal to the transducer, which converts it into a signal 0 - 1V or 0 - 20mA, with 0 corresponding to the bottom, measuring threshold, and 1 (20) maximum threshold of measurement.

With the increasing density of ice measured signal will change its value from 0 to 1 (0 - 20). Based on measurements obtained information about a density of manufactured ice cream.

Using our device will achieve repeatability in the manufacture of ice cream.

programming	The programming	With two keyboard keys, two modes of operation: programming, normal operation
	The security parameters	Automatic locking when working
Power Supply	voltage	170-250V AC
	Power consumption	1,5VA
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	4 digits (red - 14mm)
	degree of protection	From the front IP54, IP20 total
	operating temperature	0 - 60 °C
	humidity	80% without condensation
	weight	150g
	Sizes	WxSxG (36x72x75mm)
	Mounting Hole Dimension	WxS (33x69mm)
	Mounting plate thickness	to 8mm
	Faceplate Color	gray, the other to agree on