The system temperature and humidity UPWT TELDREAM company is based on a Swiss digital sensors. Normally these sensors offer high accuracy of ± 3% relative humidity. The offer is also more accurate versions with a maximum error of ± 2%. Additionally, it provides temperature measurement, optional for recording rapid changes in temperature put in the same housing additional Pt100 (version UPWT). The sensor can operate in temperatures from -40 ° C to 120 ° C. If you intend to work outside the scope of -20 ° C to 80 ° C, or in particularly difficult conditions, please let us know so we can choose the right cover.

These sensors have been used in greenhouses and drying. They work without any problems at temperatures of up to 90 ° C and high humidity. These are high quality sensors, virtually flawless. Additionally, these sensors are resistant to condensation, drying themselves after they return to normal operation.

Typically, the measuring system is working with PPM transmitters for analog signal changing standards of voltage, or current. It can also work directly with the regulator URM72 dual channel version of the sensor modules SRD data registration system, and with temperature and humidity WTW.

inputs	One measurement input configured in the production process	Temperature measurement input: Resistance sensors, thermocouples, linear signals, digital temperature sensor and wigotności UPWT
	resolution of measurement	0,1% range - 10 bit ADC
outputs	Digital output 4 wire Analog 3-wire	Power, weight, line clock and data line Optional: 4 - 20 mA, 0 - 20 mA, 0 - 10V, 0 - 1 V.
Power Supply	voltage power consumption	2,4 - 5,5 VDC 0,1W
Measuring range	temperature relative Humidity	-40 ° C to 120 ° C 0 - 100% RH
measuring accuracy	temperature relative Humidity	+ / -0.5 ° C - + / -1.5 ° C depending on the scope, or as Pt100 + / -3% (Optional ± 2%) in the range 20-80% RH
Range of of work	temperature relative Humidity	-40 ° C to 120 ° C (may be limited by the housing) 0 - 100% RH