The latest controller is a universal regulator URM12 that could successfully compete with the best practices existing in the market. Allows you to adjust both the hysteresis, as well as using PID. Extensive measurement input enables you to collaborate with a wide range of sensors such as sensors, resistive (eg Pt100), thermocouple, sensors with current output 0-20mA or 4-20mA, or a voltage output 0-1V. All these features make the URM12 controller can successfully control the temperature, humidity, pressure and other physical quantities.

The controller is offered in two versions, full and economical.


Economy version has:

• Programmable measuring circuit allowing the choice of the sensor during operation
• 10-bit analog-digital converter providing satisfactory for most applications, measurement accuracy
• timer function

Full version has an additional:

• 12-bit analog-digital converter for even greater accuracy
• Clock allowing it to adjust a preset time
• Galvanically isolated communication interface RS485 MODBUS ASCII
• Analog output (current, or voltage)

Versatility solution, and a wide range of attachable sensors allows you to use this device to control various processes such as heating, cooling, cooking, drying, pressure control, level, etc.

• Implemented functions:
  maintain the set value (eg temperature, humidity), two independent processes
  process Control
• Number of measuring inputs: 1
• wide range of sensors connectable
• Control Option: contactors, triacs, thyristors
• type of control: PID or hysteresis
• PID parameters can be programmed by the user
• Sound and light alarm signals:
  - exceeding the limit value (eg temperature)
  - sensor failure
• non-volatile memory to memorize the set of parameters
• continuation of the process after a power interruption.

inputs	One universal measurement input	It works with sensors: resistance sensors Pt100, Pt1000,Pt500, Ni100. Thermocouples J, K, N, S, R, B. Sensors for linear output 0-1V, 4-20mA, or 0-20mA
	resolution of measurement	0,1% range - 10 bit ADC 0,025% range - 12-bit converter (optional)
output	One relay output (optional input)	5A/250VAC, resistive load (optional 5VDC or 9VDC)
	One current output (optional)	4 - 20 mA (optional voltage output 0 - 1 V)
	One output voltage alarm	Typically, you can connect an external buzzer or light
communication Interface	RS485 MODBUS ASCII	optional
programming	The programming	The keyboard 3 keys, 2 modes of operation: programming, normal operation, or by a MODBUS ASCII
	The security parameters	Automatic locking when working
control	control Method	Hysteresis - programmable hysteresis PID – programmable control parameters
Power Supply	voltage	230 VAC, 24 VAC, 12 VAC, 8-32 VDC
	power consumption	3VA
alarms	Limit value alarm	The signal light and sound - pulsing
	sensor failure	The signal light and sound - pulsing
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	4 digits (red - 14mm)
	degree of protection	From the front IP54, IP20 total
	operating temperature	0 - 60 °C
	humidity	80% without condensation
	weight	360g
	Sizes	WxSxG (48x96x90mm)
	Mounting Hole Dimension	WxS (43x93mm)
	Mounting plate thickness	to 8mm
	Faceplate Color	gray (other by arrangement)

Description of terminals


Types of measuring inputs

code	sensor	range
1	Thermocouple J	0 - 800°C
2	Thermocouple K	0 - 1200°C
3	Thermocouple N	0 - 1300°C
4	Thermocouple S	0 - 1500°C
5	Thermocouple R	0 - 1500°C
6	Thermocouple B	0 - 1700°C
7	Pt100	-200 - 750°C
8	Pt500	-200 - 750°C
9	Pt1000	-200 - 750°C
10	Ni100	-60 - 180°C
11	0 - 1 V	-------
12	0 - 20 mA	-------
13	4 - 20 mA	-------