Regulator URM72 - SINGLE CHANNEL is a universal controller that allows control of a given process. Allows you to adjust both the hysteresis, as well as using PID. Extensive measurement input enables you to collaborate with a wide range of sensors such as sensors, resistive (eg Pt100), thermocouple, sensors with current output 0-20mA or 4-20mA, or a voltage output 0-1V.

Two, large, four - tail displays (red, blue, or green) represent on current measured value, and setting which makes handling very easy and much easier to work.

Versatility solution, and a wide range of attachable sensors allows you to use this device to control various processes such as heating, cooling, cooking, drying, pressure control, level, etc.

Controller with the connected temperature sensor serves as a temperature controller

• functions performed:
  - maintain the set value (eg temperature, humidity)
  - process Control
• Number of measuring inputs: 1
• wide range of sensors connectable
• Control Option: contactors, triacs, thyristors
• type of control: PID or hysteresis
• PID parameters can be programmed by the user
• Sound and light alarm signals:
  - exceeding the limit value (eg temperature)
  - sensor failure
• non-volatile memory to memorize the set of parameters
• continuation of the process after a power interruption.

inputs	One universal measurement input	It works with sensors: resistance sensors Pt100, Pt1000,Pt500, Ni100. Thermocouples J, K, N, S, R, B. Sensors for linear output 0-1V, 4-20mA, or 0-20mA A digital measurement system of temperature and humidity UPWT company TELDREAM
	resolution of measurement	0,1% range - 10 bit ADC 0,025% range - 12-bit converter (optional)
exit	One contact output (optional input)	5A/250VAC, resistive load (5VDC, 9VDC optional)
	One voltage output	Typically, you can connect an external buzzer or light
programming	The programming	With the keyboard, two modes of operation: programming, normal operation
	The security parameters of the programming	Automatic locking when working
adjustment	control Method	Hysteresis - programmable hysteresis PID – programmable control parameters Others on request (eg three-way valve control)
Power Supply	voltage	230 VAC, 24VAC, 12VAC, 8-32VDC
	power consumption	1,5VA
alarms	Exceeding the scope of	The signal light and sound - pulsing
	sensor failure	Light and sound signal - a continuous
other	memory	Protection against power outages, Enduring memory parameter setting value
	digital display	4 + 4 digits (red, green, or blue - 14mm)
	degree of protection	From the front IP65 (with seal), total IP20
	operating temperature	0 - 60 °C
	humidity	80% without condensation
	weight	300g
	Sizes	WxSxG (72x72x80mm)
	Mounting Hole Dimension	WxS (69x69mm)
	Mounting plate thickness	to 6mm
	Faceplate Color	gray (other by arrangement)

Opis zacisków


Types of measuring inputs

code	sensor	range
1	Thermocouple J	0 - 800°C
2	Thermocouple K	0 - 1200°C
3	Thermocouple N	0 - 1300°C
4	Thermocouple S	0 - 1500°C
5	Thermocouple R	0 - 1500°C
6	Thermocouple B	0 - 1700°C
7	Pt100	-200 - 750°C
8	Pt500	-200 - 750°C
9	Pt1000	-200 - 750°C
10	Ni100	-60 - 180°C
11	0 - 1 V	-------
12	0 - 20 mA	-------
13	4 - 20 mA	-------
14	UPWT temperature humidity	-40 – 120°C 0-100 %RH