WATER DISPENSER USP ​​is a device equipped with a microprocessor controller, designed for measuring the flow of water required. Especially useful for metering of water is needed in various technological processes in which the amount of water is important eg in processes in the food industry (bakery, confectionery, pasta production, steel, etc., when the water gets to a temperature which is at issue).

USP WATER DISPENSER is designed to collect water from the water supply network. The device is continuously measured in both the amount of discharged water and its temperature and presents the information on the displays. Having measured the quantity of water dispenser set automatically closes its flow.

Dispensers of our production are new, yet proven and tested product that is constantly improved and developed based on feedback from existing users.

Control unit is an electronic dispenser USP microprocessor controller designed and manufactured by our company based on the latest electronics. Driver software is also done in our company so we can immediately respond to the suggestions reported by current users.

Actuators (solenoid valves, flow sensors) mounted dispensers are of the highest quality and are manufactured by world-renowned companies such as: Rossweiner, Danfoss, Esco, Hankook, and others.

water connections	How to Connect	flare ½ / ¾ inch hose or ½ / ¾ inch
programming	The programming	Using the keypad, 4 function keys, 5 keys to set values​​, the two modes of operation
	Programmable parameters: temperature correction flow coefficient	+/- 5 °C 10.0 - 90.0 typical: 74.0 dla ½ cala                                    18.0 dla ¾ cala
Setting	Set size: Measured quantity of water	0.1 - 99.9 liters (or 1-999 liters)
water pressure	maximum	5 bar
flow	minimum	1.50 l / min to ½ inch 3.00 l / min for the ¾ inch
	maximum	25.0 l / min to ½ inch 60.0 l / min for the ¾ inch
	measurement error	+/-1.5%
Power Supply	voltage	230VAC +/-10% 50Hz
	Maximum power consumption	8VA
alarms	Over range (alarm at 97 deg C)	Intermittent light and audible signal
	Temperature sensor failure	Intermittent light and audible signal
	No signal from flow sensor with an open discharge	Intermittent light signal
	Speech signals from the sensor with a closed discharge	Continuous light signal and the intermittent sound
other	memory	Protection against loss of supply voltage, nonvolatile flash memory parameter setting value Memory of last 100 operations
	digital display	3 + 2 digits (red 14 mm)
	degree of protection	From the front IP54, IP20 total
	installation Category	I
	degree of pollution	I
	fuse	2 x 500 mA type M or T
	operating temperature	0 - 45 ° C
	humidity	80% without condensation
	weight	3.2 kg - 1/2 inch Polycarbonate 4 kg - 1/2 inch stainless steel 4.7 kg - 3/4 inch Polycarbonate 5,5 kg - 3/4 inch stainless steel
	Frame sizes	WxSxG (190x280x140mm)
	housing material	PC (polycarbonate) or stainless steel
	Hole Spacing	255mm - Polycarbonate 225mm - stainless steel
	Faceplate Color	gray