Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Gas Invigilator PSG
General information
Gas Invigilator PSG is a device used to detect gas concentration, which might be explosive or poisonous. PSG was design for households to assure maximum safety to inhabitants.
Versions
Gas Invigilator is produced in two different versions:
PSG has plastic casing with built-in three signal LEDs. There are also openings for gas sensor and buzzer. Since device has additional output, there is possibility to attach another buzzer (or many of them) in different room.
Power supply
Device needs +9VDC voltage to operate. There is suitable power pack delivered with gas invigilator.
Gas Invigilator PSG is a device used to detect gas concentration, which might be explosive or poisonous. PSG was design for households to assure maximum safety to inhabitants.
Versions
Gas Invigilator is produced in two different versions:
- PSG1 - natural gas detection
- PSG2 - propane-butane gas detection
PSG has plastic casing with built-in three signal LEDs. There are also openings for gas sensor and buzzer. Since device has additional output, there is possibility to attach another buzzer (or many of them) in different room.
Power supply
Device needs +9VDC voltage to operate. There is suitable power pack delivered with gas invigilator.
| Power supply | Voltage | 220VAC +/- 15% |
| Power consumption | 1VA | |
| Other features | Signals types | "attention" - light signal "alarm" - light and sound signal |
| Signals thresholds | "attention" aprox. 1 - 2% of explosive conditions "alarm" aprox. 7 -12% of explosive conditions |
|
| Safety level | Safe voltage powered (Total IP20) | |
| Work temperature | 0 - 60 ° C | |
| Humidity | 80% without condensation | |
| Weight | 80g | |
| Casing Dimensions | HxWxL (105x54x28mm) | |
| Calibration conditions | Temperature +22 ° C; Humidity 50% | |
| Casing material | Plastic | |
| Front panel color | Green |
To order select type:
Types: PSG1 or PSG2
- PSG1 - natural gas detection
- PSG2 - propane-butane gas detection
