Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Temperature and Humidity Regulator STW
Regulator STW is specialized, two channel regulator designed to work with devices that require control over both temperature and humidity. The STW regulator has two additional relays controlled from a main panel. These additional outputs can be used to control for example lighting, fans etc. This regulator can also be equipped with a galvanic isolated RS485 MODBUS ASCII / RTU interface that makes it possible to communicate with other devices and PC computers.
| Inputs | One temperature measurement input for resistance sensors, thermocouples and standard
signal sensors One humidity measurement input for standard signal sensors |
|
| Measurement resolution | 0,1% of measurement range | |
| Outputs | Four relay outputs 5A/250VAC, resistance load | |
| Communication interface | RS485 MODBUS ASCII / RTU galvanic isolated | |
| User interface | 9 keys LED display 3+2 digits - (red - temperature, blue - humidity, height – 14mm) |
|
| Alarms |
Range exceeded Sensor damage |
|
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 8-35VDC 4VA |
| Enclosure and assembly | Degree of protection | Front IP54, total IP20 |
| Operating temperature | 0 - 60 ° C | |
| Maximum humidity | 80% without condensation | |
| Weight | 400g | |
| Enclosure dimensions | HxWxL (96x96x130mm) | |
| Assembly slot size | >HxW (91x91mm) | |
| Maximum mounting plate thickness | 8 mm | |
External connections
Input sensor type
Temperature Measurement input type
| Code | Sensor | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 10 V | ------- |
| 7 | 0 - 20 mA | ------- |
| 8 | 4 - 20 mA | ------- |
Humidity measurement input type
| Code | Sensor | Range |
| 1 | 0 - 1 V | ------- |
| 2 | 0 - 10 V | ------- |
| 3 | 0 - 20 mA | ------- |
| 4 | 4 - 20 mA | ------- |
| STW | - | X | - | X | - | X | - | X | - | X | |||
| | | | | | | | | | | _ | Power supply | |||||||
| | | | | |
| | | | |
| | | | |
| | | | |
1: 230 VAC 2: 24 VAC 3: 12 VAC 4: 8 - 35 VDC |
|||||||||
| | | | | | | | | ||||||||||
| | | | | | | | | _ | _ | _ | Interface | ||||||
| | | |
| | |
| | |
0: none 1: RS485 MODBUS |
||||||||||
| | | | | | | |||||||||||
| | | | | | | _ | _ | _ | _ | _ | Output type | |||||
| | | | |
| | | |
S: relay N: voltage |
|||||||||||
| | | | | ||||||||||||
| | | | | _ | _ | _ | _ | _ | _ | _ | Hum. sensor type | ||||
| | | see table | ||||||||||||
| | | |||||||||||||
| | | _ | _ | _ | _ | _ | _ | _ | _ | _ | Temp. sensor type | |||
| see table | |||||||||||||
| Ordering example: | |||||||||||||
| STW-1-4-1-1 | |||||||||||||
|
Regulator STW, temperature
sensor–Pt100, humidity
sensor 0-1 V, communication interface RS485 MODBUS, power supply 230 VAC. |
|||||||||||||
Input sensor type
Temperature Measurement input type
| Code | Sensor | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 10 V | ------- |
| 7 | 0 - 20 mA | ------- |
| 8 | 4 - 20 mA | ------- |
Humidity measurement input type
| Code | Sensor | Range |
| 1 | 0 - 1 V | ------- |
| 2 | 0 - 10 V | ------- |
| 3 | 0 - 20 mA | ------- |
| 4 | 4 - 20 mA | ------- |
