Industrial Automatics - controls, measurement, regulators, sensors...

Microprocessor Time Relay TRM12-T

TRM12-T is a device designed to control industrial processes on a time basis. It is equipped with one switching relay. It has a very user - friendly user interface, all the values are entered using a rotary encoder (a knob) witch a switch. This solution is very popular especially among bakers, that work with gloves on their hands and therefore find it hard to operate devices with keys.

The device can work in one of the following modes:
  • Turn the relay on for a set time period. After this time the relay is switched off.
  • Turn the relay on after a set time period. The relay is turned on until it is released by a button.
  • Turn the relay on after a set time period for a previously entered period of time.
  • Periodically turn the relay on and off. Both on and off times are programmable.
Time can be determined in:
  • Hours and minutes
  • Minutes and seconds
  • Seconds and hundredths of seconds
The device can be equipped in additional input that allows to connect an external button, that can be used to toggle time measurement.

There is a possibility to order a microprocessor relay that can work in a cascade, or that can be controlled through RS485 MODBUS ASCII / RTU interface.
Microprocessor Time Relay TRM12-T

Inputs One optional input dedicated for an external START / STOP button
Outputs One relay output, 5A/250VAC, resistance load
Communication interface
Communication interface RS485 MODBUS ASCII / RTU galvanic isolated

User interface Encoder with a switch
LED display, 4 digits (red - 14mm)
Alarms End of time
Power supply Voltage
Power consumption
230VAC, 24VAC, 12VAC, 8-35VDC
1,5VA
Enclosure and assembly Degree of protection Front panel IP54 , total IP20
Operating temperature 0 - 60 °C
Max. Humidity 80% without condensation
Weight 360g
Enclosure dimensions HxWxL (48x96x90mm)
Assembly panel mounted
Assembly slot size HxW (43x91mm)
Maximum thickness of mounting plate 8mm


External connections
Microprocessor Time Relay TRM12-T - connections

      TRM12-T- X      
        | _ Voltage supply  
            1: 230 VAC
2: 24 VAC
3: 12 VAC
4: 8 - 35 VDC
 
               
               
               
               
Ordering example:
TRM12-T-1
Microprocessor time relay TRM12-T, power supply 230 VAC
               
               
               
               
               
© TELDREAM
tel/fax: 058 348 56 95
email: teldream@teldream.com
firma w internecie