Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Universal Temperature Regulator UR11
UR11 is a modern and cheep temperature regulator that can be applied in various machines. Many users appreciate its' simplicity and reliability. The setpoint is entered using a potentiometer on a front panel, large, easily legible display presents the measured temperature in Celsius degrees.
Displays' resolution is 0,1°C for 0 - 99.9°C measurement range, or 1°C for 0 - 300 °C range.
It is offered in a hysteresis version (for example for oil / gas ovens), or with proportional regulation (for electric heaters).
Typically the hysteresis is set to 3 °C. In case of proportional algorithm the proportional regulation range is set to +/- 7 oC with a switching period 15 seconds.
This regulator can work as a autonomic unit (it has a built - in relay), or can drive a solid state relay, or a power relay.
It can be adjusted to work with a Pt100 sensor, with thermocouples, or with standard signal sensors.
Displays' resolution is 0,1°C for 0 - 99.9°C measurement range, or 1°C for 0 - 300 °C range.
It is offered in a hysteresis version (for example for oil / gas ovens), or with proportional regulation (for electric heaters).
Typically the hysteresis is set to 3 °C. In case of proportional algorithm the proportional regulation range is set to +/- 7 oC with a switching period 15 seconds.
This regulator can work as a autonomic unit (it has a built - in relay), or can drive a solid state relay, or a power relay.
It can be adjusted to work with a Pt100 sensor, with thermocouples, or with standard signal sensors.
| Inputs | One measurement input for resistance sensors, thermocouples, or standard signals | |
| Measurement resolution | 0,025% of measurement range- 12-bit analogue to digital converter | |
| Outputs | Two relay outputs 5A/250VAC, resistance load, both switched simultaneously | |
| User interface |
1 button, potentiometer to enter setpoint LED display 3 digits (green - 14mm) |
|
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 12VDC 4VA |
| Enclosure and assembly | Degree of protection | Total IP20 |
| Operating temperature | 0 - 60 °C | |
| Maximum humidity | 80% without condensation | |
| Weight | 550g | |
| Enclosure dimensions | HxWxL (96x96x85mm) | |
| Assembly | Table mounted | |
| Assembly slot size | HxW (90x90mm) | |
| Maksimum assembly plate thickness | 8 mm | |
External connections
Measurement input type
| Code | Sensor | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 10 V | ------- |
| 7 | 0 - 20 mA | ------- |
| 8 | 4 - 20 mA | ------- |
| UR11 | - | X | - | X | - | X | - | X | - | X | |||
| | | | | | | | | | | _ | Power supply | |||||||
| | | | | |
| | | | |
| | | | |
| | | | |
1: 230 VAC 2: 24 VAC 3: 12 VAC 4: 12 VDC |
|||||||||
| | | | | | | | | ||||||||||
| | | | | | | | | _ | _ | _ | Output type | ||||||
| | | | |
| | | |
| | | |
S: relay N: voltage |
||||||||||
| | | | | | | |||||||||||
| | | | | | | _ | _ | _ | _ | _ | Sensor type | |||||
| | | | | see table | |||||||||||
| | | | | ||||||||||||
| | | | | _ | _ | _ | _ | _ | _ | _ | Regulation algorithm | ||||
| | | |
P: proportional H: hysteresis |
||||||||||||
| | | |||||||||||||
| | | _ | _ | _ | _ | _ | _ | _ | _ | _ | Regulation range | |||
| A: 0 - 100°C B: 0 - 300°C C: other (determine) |
|||||||||||||
| Ordering example: | |||||||||||||
| UR11-A-P-4-S-1 | |||||||||||||
|
UR11 regulator measurement
range 0-100 °C, proportional regulation, sensor PT100, relay output, power supply 230 VAC |
|||||||||||||
Measurement input type
| Code | Sensor | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 10 V | ------- |
| 7 | 0 - 20 mA | ------- |
| 8 | 4 - 20 mA | ------- |
