Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Universal Humidity Regulator UR12
UR12 is a modern and cheap humidity regulation that has a wide range of possible applications. Many users appreciate its' simplicity and reliability. The setpoint is entered using a potentiometer on a front panel, large, easily legible display presents the measured relative humidity in percents. Display resolution is 0,1 %RH.
It can regulate humidity in a ful range 0-100 %RH, it works with the humidity transducer UPW that is offered by TELDREAM, or with any standard signal sensor.
This regulator can work as a autonomic unit (it has a built - in relay), or can drive a solid state relay, or a power relay.
It can regulate humidity in a ful range 0-100 %RH, it works with the humidity transducer UPW that is offered by TELDREAM, or with any standard signal sensor.
This regulator can work as a autonomic unit (it has a built - in relay), or can drive a solid state relay, or a power relay.
| Inputs | One measurement input for resistance sensors, thermocouples, or standard signals | |
| Measurement resolution | 0,025% of measurement range- 12-bit analogue to digital converter | |
| Outputs | Two relay outputs 5A/250VAC, resistance load, both switched simultaneously | |
| User interface |
1 button, potentiometer to enter setpoint LED display 3 digits (green - 14mm) |
|
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 12VDC 4VA |
| Enclosure and assembly | Degree of protection | Total IP20 |
| Operating temperature | 0 - 60 °C | |
| Maximum humidity | 80% without condensation | |
| Weight | 550g | |
| Enclosure dimensions | HxWxL (96x96x85mm) | |
| Assembly | Table mounted | |
| Assembly slot size | HxW (90x90mm) | |
| Maksimum assembly plate thickness | 8mm | |
External connections
Measurement input type
| Code | Sensor | Range |
| 1 | UPW | 0 - 100 %RH |
| 2 | 0 - 1 V | ------- |
| 3 | 0 - 10 V | ------- |
| 4 | 0 - 20 mA | ------- |
| 5 | 4 - 20 mA | ------- |
| UR12- | X | - | X | - | X | ||||||||
| | | | | | | _ | Power supply | |||||||||
| | | | | |
| | | | |
1: 230 VAC 2: 24 VAC 3: 12 VAC 4: 8 - 35 VDC |
|||||||||||
| | | | | ||||||||||||
| | | | | _ | _ | _ | Output type | ||||||||
| | | | |
S: relay N: voltage |
||||||||||||
| | | |||||||||||||
| | | _ | _ | _ | _ | _ | Sensor type | |||||||
| see table | |||||||||||||
| Ordering example: | |||||||||||||
| UR12-1-S-1 | |||||||||||||
|
Humidity regulator UR12 sensor UPW, relay output, power supply 230 VAC |
|||||||||||||
Measurement input type
| Code | Sensor | Range |
| 1 | UPW | 0 - 100 %RH |
| 2 | 0 - 1 V | ------- |
| 3 | 0 - 10 V | ------- |
| 4 | 0 - 20 mA | ------- |
| 5 | 4 - 20 mA | ------- |
