Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Microprocessor Controller USPP-TCF
USPP-TCF is a microprocessor controller which controls temperature and measures time. USPP-TCF is designed for tunnel ovens. Controlling method is based on PID or hysteresis type. Since the controller is universal, it can be used everywhere, where regulation of temperature and measuring of time is needed. Device is fully programmable and all programmed parameters are stored in non-volatile memory. Controller can be installed both in new and used up ovens.
USPP-TCF controller is two-channel regulator. It controls temperature in two different places in an oven. The device reads temperature from two sensors and controls the work of relays.
Additionally USPP-TCF measures the time needed by the conveyor belt to go through the oven, or the frequency of inverter.
Measured values of temperature and time (or frequency) are presented on displays in real-time. There are additional LEDs on the front panel that indicate whether output is on or off. Other LEDs are used to signal alarm states. There are separate buttons to control additional functions like switching light, ventilation, etc. Device has a sound signalling device to indicate the end of measured time.
USPP-TCF controller is two-channel regulator. It controls temperature in two different places in an oven. The device reads temperature from two sensors and controls the work of relays.
Additionally USPP-TCF measures the time needed by the conveyor belt to go through the oven, or the frequency of inverter.
Measured values of temperature and time (or frequency) are presented on displays in real-time. There are additional LEDs on the front panel that indicate whether output is on or off. Other LEDs are used to signal alarm states. There are separate buttons to control additional functions like switching light, ventilation, etc. Device has a sound signalling device to indicate the end of measured time.
| Inputs |
Two temperature measurement inputs for resistance sensors,
thermocouples and standard signals Alarm input |
|
| Measurement input | 0,1% of measurement range- 10-bit analogue to digital converter | |
| Outputs |
Four relay outputs 5A/250VAC, resistance load Two voltage outputs |
|
| User interface |
12 keys LED display 3+2 digits (red, or green - 14mm) |
|
| Alarms |
Alarm value exceeded Sensor damage Damage in power circuit |
|
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 12VDC 4VA |
| Enclosure and assembly | Degree of protection | Front IP54, total IP20 |
| Operating temperature | 0 - 60 ° C | |
| Maximum humidity | 80% without condensation | |
| Weight | 950g | |
| Enclosure dimensions |
HxWxL (96x96x120mm) - Metal enclosure (96x96x100mm) - Plastic enclosure (Strengthened Noryl) |
|
| Assembly method | Table mounted | |
| Assembly slot size | HxW (91x91mm) | |
| Maximum assembly panel thickness | 8mm | |
External connections
Measurement input type
| Code | Sensore | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 20 mA | ------- |
| 1 | 4 - 20 mA | ------- |
| USPP-TCF- | X | - | X | - | X | - | X | ||||||
| | | | | | | | | _ | Power supply | ||||||||
| | | | | |
| | | | |
| | | | |
1: 230 VAC 2: 24 VAC 3: 12 VAC 4: 12 VDC |
||||||||||
| | | | | | | |||||||||||
| | | | | | | _ | _ | _ | Output type | |||||||
| | | | |
| | | |
S: relay N: voltage |
|||||||||||
| | | | | ||||||||||||
| | | | | _ | _ | _ | _ | _ | Sensor type | ||||||
| | | see table | ||||||||||||
| | | |||||||||||||
| | | _ | _ | _ | _ | _ | _ | _ | Enclosure type | |||||
| M: Metal P: Plastic |
|||||||||||||
| Ordering example: | |||||||||||||
| USPP-TCF-M-4-S-1 | |||||||||||||
| Universal tunnel oven regulator USPP-TCF, metal enclosure, sensor PT100, relay output, power supply 230 VAC | |||||||||||||
Measurement input type
| Code | Sensore | Range |
| 1 | Thermocouple J | 0 - 800°C |
| 2 | Thermocouple K | 0 - 1200°C |
| 3 | Thermocouple N | 0 - 1300°C |
| 4 | Pt100 | -200 - 750°C |
| 5 | 0 - 1 V | ------- |
| 6 | 0 - 20 mA | ------- |
| 1 | 4 - 20 mA | ------- |
