Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Bakery ovens' steam controller USP-Z
Bakery ovens' steam controller USP-Z has been designed to enhance baking process. Traditionally the amount of water that is supplied to the steam generator in an oven is regulated on a time basis. This solution doesn't provide satisfying process repeatability, because the amount of delivered water tend to change with water pressure and due to the mineral deposits. The USP-Z dispenses an exactly desired water amount to each ovens' chamber providing an excellent repeatability and therefore helps to improve the production quality and minimize loses.
USP-Z can drive up to five elektrovalves that control water flow to five different ovens' chambers.
Basic USP-Z system consists of a microprocessor controller and a flowmeter with a digital output. In this version the steam controller uses electrovalves that are already installed in an oven.
There is also a possibility of ordering a compact unit that consists of a desired number of electrovalves, a flowmeter and an electronic controller.
USP-Z can drive up to five elektrovalves that control water flow to five different ovens' chambers.
Basic USP-Z system consists of a microprocessor controller and a flowmeter with a digital output. In this version the steam controller uses electrovalves that are already installed in an oven.
There is also a possibility of ordering a compact unit that consists of a desired number of electrovalves, a flowmeter and an electronic controller.
| Inputs | One input for flowmeter | |
| Outputs |
Four relay outputs 5A/250VAC, resistance load One voltage output |
|
| User interface |
9 keys LED display 3+2 digits (czerwony - 14mm) |
|
| Alarms |
No signal from flow sensor Signal from flow sensor while the electrovalve is closed - possible valve leak |
|
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 8-35VDC 3VA |
| Enclosure and assembly | Degree of protection | Front IP54, total IP20 |
| Operating temperature | 0 - 60 °C | |
| Maximum humidity | 80% without condensation | |
| Weight | 950g | |
| Enclosure dimensions | HxWxL (96x96x80mm) | |
| Assembly method | Table mounted | |
| Assembly slot size | HxW (91x91mm) | |
| Maximum mounting plate thickness | 8mm | |
External connections
To order Bakery ovens' steam controller USP-Z please contact TELDREAM representatives to select proper system components.
