Industrial Automatics - controls, measurement, regulators, sensors...
- Data Acquisition Systems
- Regulators of Temperature
- Universal Temperature Regulator UR11
- Microprocessor Temperature Regulator URM11-T
- Threshold Thermoregulator WP
- Regulators of Humidity
- Regulators of Temperature and Humidity
- Universal Regulators
- Controllers of Furnaces
- Microprocessor Oven Controller USPP-E
- Microprocessor Oven Controller USPP-G
- Microprocessor Controller USPP-TCF
- Controllers of Drying Rooms
- Controllers and Time Relays
- Water Feeders and Mixers
- Displays
- Gas Invigilators
- Measurement Transducers
- Sensors and Measurement Systems
- Semiconductor Devices
Threshold Thermoregulator WP
Threshold switch is simple hysteresis thermoregulator. It can be used as independent device (it has built in relay) or it can control work of other relay.
Typically, it is used as additional thermal protection in devices like for example baking ovens.
Threshold switch WP is produced in two versions: auto or manual. In auto version, relay is switched off when temperature reach set threshold and automatically switched on when temperature drop below hysteresis value.
In manual version user must switch relay on manually, using button.
WP is produced for different temperature ranges:
Typically, it is used as additional thermal protection in devices like for example baking ovens.
Threshold switch WP is produced in two versions: auto or manual. In auto version, relay is switched off when temperature reach set threshold and automatically switched on when temperature drop below hysteresis value.
In manual version user must switch relay on manually, using button.
WP is produced for different temperature ranges:
- 0-300 °C or 300-500 °C or other.
- Hysteresis value is typically set on 5°C.
- WP is adjusted to work with PT100 thermosensors.
- It has standard casing (35x89mm) to be mounted on rail.
- Threshold value is set using potentiometer
| Inputs | One temperature measurement input for PT100 sensor | |
| Outputs | One relay output 5A/250VAC, resistance load | |
| User interface | Potentiometer used to enter setpoit | |
| Power supply |
Voltage Power consumption |
230VAC, 24VAC, 12VAC, 12VDC 2VA |
| Pobierana moc | 2VA | |
| Enclosure and dimensions | Degree of protection | Total IP20 |
| Operating temperature | 0 - 60 ° C | |
| Maximum humidity | 80% without condensation | |
| Weight | 250g | |
| Enclosure dimensions | HxWxL (83x36x89mm) | |
| Assembly method | rail mounted | |
External connections
| WP | - | X | - | X | - | X | - | X | |||||
| | | | | | | | | _ | Power supply | ||||||||
| | | | | |
| | | | |
| | | | |
1: 230 VAC 2: 24 VAC 3: 12 VAC 4: 8 - 35 VDC |
||||||||||
| | | | | | | |||||||||||
| | | | | | | _ | _ | _ | Output type | |||||||
| | | | |
| | | |
S: relay N: voltage |
|||||||||||
| | | | | ||||||||||||
| | | | | _ | _ | _ | _ | _ | Regulation range | ||||||
| | | | |
A: 0 - 300°C B: 300 - 500°C C: other (determine) |
||||||||||||
| | | |||||||||||||
| | | _ | _ | _ | _ | _ | _ | _ | Wersja | |||||
| A: auto M: manual |
|||||||||||||
| Ordering example: | |||||||||||||
| WP-A-A-S-1 | |||||||||||||
|
Threshold Thermoregulator
WP version auto, range 0-300 °C, relay output, power supply 230 VAC |
|||||||||||||
